PHOENIX INDUSTRIES INC -- ISOPROPANOL, ANHYDROUS  -- 6810-00-543-7915
<pre>=====================  Product Identification  =====================

Product ID:ISOPROPANOL, ANHYDROUS
MSDS Date:04/17/1998
FSC:6810
NIIN:00-543-7915
Status Code:A
=== Responsible Party ===
Company Name:PHOENIX INDUSTRIES INC
Address:11028  LEADBETTER RD  UNIT 10
City:ASHLAND
State:VA
ZIP:23005
Country:US
Info Phone Num:804-264-5183
Emergency Phone Num:804-264-5183
Chemtrec Ind/Phone:(800)424-9300
CAGE:0YED2
=== Contractor Identification ===
Company Name:PHOENIX INDUSTRIES INC
Address:1519 CHAMBERLAYNE PARKWAY
Box:City:RICHMOND
State:VA
ZIP:23222
Country:US
Phone:804-264-5183/FAX: 264-5535
Contract Num:SP0450-99-M-C829
CAGE:0YED2

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPROPANOL, ANHYDROUS
CAS:67-63-0
RTECS #:NT8050000
= Wt:100.
Other REC Limits:NONE RECOMMENDED
OSHA PEL:980 MG/M3;400 PPM
OSHA STEL:500 PPM
ACGIH TLV:983 MG/M3;400 PPM
ACGIH STEL:1230 MG/M3;500 PPM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS: EYE, SKIN, CNS,
    RESPIRATORY AND GI TRACTS (HMIS). ACUTE - EYE CONTACT: LIQUID
    CAUSES SLIGHT TO MODERATE IRRITATION WITH POTENTIAL FOR CORNEAL
    INJURY. SKIN CONTACT: PROLONGED CONTACT MAY  CAUSE DRYNESS AND
    CRACKING. PROLONGED EXPOSURE OVER LARGE AREAS MAY RESULT IN
    ABSORPTION OF HARMFUL AMOUNTS BY INFANTS. INHALATION: EXPOSURE TO
    LOW CONCENTRATIONS MAY CAUSE NOSE AND THROAT IRRITATION . EXPOSURE
    TO CONCENTRATIONS ABOVE TLV MAY CAUSE HEADACHE AND DROWSINESS.
    SWALLOWING: SLIGHTLY TOXIC. INGESTION OF A LARGE QUANTITY MAY CAUSE
    LOSS OF CONSCIOUSNESS, NAUSEA, VOMITING, STOMACH PAINS. CH HRONIC -
    NO DATA TO SHOW ADVERSE EFFECTS
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYE IRRITATION WITH POTENTIAL FOR CORNEAL
    INJURY, SKIN DRYNESS AND CRACKING, NOSE AND THROAT IRRITATION,
    HEADACHE, DROWSINESS, LOSS OF CONSCIOUSNESS, NAUSEA, VOMITING,
    STOMACH PAINS, CRAMPS

=======================  First Aid Measures  =======================

First Aid:N/P. WASH THOROUGHLY AFTER HANDLING ANY CHEMICAL MATERIAL.
    CONSULT A PHYSICIAN IF EYE CONTACT OCCURS OR INGESTED (HMIS).

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=11.7C, 53.F
63F TOC
Lower Limits:2.0 %
Upper Limits:12.7 % @200F
Extinguishing Media:APPLY ALCOHOL-TYPE OR GENERAL PURPOSE FOAMS USING
    TECHNIQUES RECOMMENDED BY MANUFACTURER FOR LARGE FIRES. FOR SMALL
    FIRES, USE CO2 OR DRY CHEMICAL AGENTS.
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONTAINERS EXPOSED TO
    FIRE. WATER SPRAY CAN DISPERSE VAPORS BUT REIGNITION MAY OCCUR. USE
    SELF-CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING IN FIRE
    EXPOSURE SITUATIONS .
Unusual Fire/Explosion Hazard:VAPORS FROM THIS PRODUCT MAY BE IGNITED
    BY SPARKS OR OPEN FLAMES OR ELECTRICAL EQUIPMENT. VAPORS MAY SETTLE
    IN LOW PLACES OR TRAVEL LONG DISTANCES TO A SOURCE OF IGNITION AND
    THUS CAUSE EXPLOSIVE FLAS HBACK. THIS PRODUCT MAY CAUSE A FLOATING
    FIRE HAZARD.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY, VENTILATED AREA
    AWAY FROM HEAT, SPARKS AND OPEN FLAMES.
Other Precautions:CAUSES EYE IRRITATION. FOR INDUSTRIAL USE ONLY.
    WARNING!  FLAMMABLE. KEEP CONTAINER CLOSED UNTIL READY FOR USE. USE
    WITH ADEQUATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE A NIOSH-APPROVED SELF-CONTAINED BREATHING
    APPARATUS IN HIGH VAPOR CONCENTRATIONS.
Ventilation:USE LOCAL VENTILATION AT POINTS WHERE VAPORS ARE EXPECTED
    TO BE PRESENT. USE GENERAL MECHANICAL ROOM VENTILATION AS REQUIRED.
Protective Gloves:RUBBER OR NEOPRENE OR PLASTIC
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:EYE WASH SYSTEM, BODY FLUSH
Work Hygienic Practices:OBSERVE GOOD INDUSTRIAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES. WASH AFTER HANDLING AND BEFORE EATING,
    DRINKING OR SMOKING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:=82.3C, 180.1F
Melt/Freeze Pt:=-88.5C, -127.3F
Vapor Pres:33 @ 68F
Vapor Density:2.07
Spec Gravity:0.7864
Evaporation Rate &amp; Reference:2.88 (BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS LIQUID, CHARACTERISTIC ODOR
Percent Volatiles by Volume:100

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL,
    STATE, AND FEDERAL LAWS AND REGULATIONS (HMIS).

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.